 AR-650 Stops at PS roller
Ar-650 with finisher (fn8) installed and it is working fine. But I went to a jamming call and the paper stops at the PS roller regardless of paper source even bypass. I removed the finisher and it works fine. I replaced logic pwb, finisher main pwb, and finisher interface pwb. I even changed out finisher. I am not sure why a finisher being attached would cause this symptom especially with an entirely different finisher swapped in. The finisher works on other machine, the copier works by itself, but put them together....jam. Logic would telll me that this MUST be a problem somewhere in the machine but where? And why only with the sorter attached? |