| Waste Bottle full Sensor
The way it works is when the waste bottle is full it backs up the toner auger in the cleaning unit and it is spring loaded. It pushes the auger back and hits the switch on the rear frame. It is a bad design, I tell my customers to empty the waste toner every time they change toner and they will run cleaner and won't go through as many drum blades. It's kinda screwy really.
I don't think lowering the toner sensor value will help but you can try it. When was the last time you changed the developer? I bet its in the developer unit. Developer, driver gears or toner sensor. Some times if the dv is old it will pull or loose an amount of dv that messes up the toner sensor value and you just have to change the dv. Thats all I can think of good luck! |