The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking
Today just flashed my mind this who in the hell designed air duster with nozzle that can't hold the flimsy air tube. Had a C554e with Stabilisation NG. Was showing p codes front and rear IDC Sensor. Took belt out had a look and all seemed clean. Still decided to give it a blow with aircan and you can only guess, yes that narrow sucker tube went flying right in to machine... Great. All drums out, all devs out and tube nowhere to be found. All angles of torch shining begging for it to show up naaah not having it. Almost on breaking point and decision of pulling the machine to bits.... Colleague lifted one drum and voila tube was found.
Just wanted to share my highlight of success today. The rest was .. Well unhappy. Thanks for reading/ listening
Sent from my iDon't believe in marketing device using Tapatalk
Firmwares HERE.OK Google! ... will I need Berrocca this morning?
Sounds a little like "e-rings". Every once in a while I'll lose one, and the thing may have well accelerated to ludicrous speed and left the solar system for all the luck I have finding it.
(Warning! The video might contain language that might be unproductive in some business environments.)
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
I keep spare eclips and screws in a little fishing tackle kit box in my tool kit.. Those little suckers are like gold. Any one remember the tiny one on the paper feed gear on the konica 7145?
Sent from my Nexus 7 using Tapatalk
Inauguration to the "AI cancel-culture" fraternity 1997...
•••••• •••[§]• |N | € | o | M | Δ | t | π | ¡ | x | •[§]••• ••••••
Sounds a little like "e-rings".I had on of those E-clips get away from me yesterday*Jesus Clips.I keep spare eclips and screws in a little fishing tackle kit box in my tool kit
Fixed those errors in the last 3 posts for you. I magnetized my precision flat heads, and needle nose pliers. Reduces Jesus Clip Launches 10 fold, and makes them easier to put back on.
Does anybody use safety glasses when removing them?
Bookmarks