Likes: It's fixed , pre registration roller assy ....
thank you all for help !!!
Thanks: 0
Dislikes: 0
Re: hp 4250 skews from both trays
It's fixed , pre registration roller assy ....
thank you all for help !!!
Congratulations on your success. Was there an obvious cause? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Yes i over looked the worn side of the pre reg roller on one side, lighting or angle was bad... Excuses excuses !!Originally Posted by blackcat4866
It was damn obvious after i removed, i'm a dumb fuu...
i' m more of a copier guy.... I had double vision, i see dead people...the excuses never end
thanks again ! !
dave
Reply With Quote
Bookmarks