| @turkeyfoot
I can´t acces the fiery, as i got no panel for the fiery- so the only way to acces would be over the ethernet.
@cobiray
Does it have a menu through the control panel?
Maybe- but I got no control panel !
Is that the print-only version?
No- the x2e can scan
Did it come from an XP environment at the previous location?
----I´m not quite sure – but most probably
I hate to ask, but have you swapped out the crossover cable?
------Never mind for asking – simple tries are always best.
But I´ve already swapped the crossover cable
I've never seen the queue's named anything other than print, direct and hold. I won't swear it won't work with what you stated, but the print and direct have always worked for me.
----It didn´t work – but anyhow that would not bring me into the fiery websetup.
In my techfiles this was said:
Minolta
Fiery XJ, SI, and ZX 2100/3100 print_Copier-M
Fiery X2[E] print_PRN-M
DI181 PORT1 9100
DI250 PORT1 10001
PI6000 any name
PI6200 (Fiery) print
I´ve got the Minolta from a business unit without any further information that it was printing with a crossover cable connected with a standalone pc.
Most probably Windows XP (the minolta with the fiery is compatible by ms for windows xp).
And now I want to install it for my brother (carpenter with own workshop/small company). |