Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 22
  1. #11
    Technician
    Join Date
    Aug 2016
    Location
    Brugge
    Posts
    33
    Rep Power
    16

    Re: MP C5501 I regularly get colored cubes

    This is my problem. (attachement)
    Attached Images Attached Images

  2. #12
    Service Manager 5,000+ Posts
    MP C5501 I regularly get colored cubes

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: MP C5501 I regularly get colored cubes

    Your sample looks like a fuser issue, i'd rule out itb cleaning as the rest on the txt image is good
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  3. #13
    Technician
    Join Date
    Aug 2016
    Location
    Brugge
    Posts
    33
    Rep Power
    16

    Re: MP C5501 I regularly get colored cubes

    Quote Originally Posted by copier tech View Post
    Your sample looks like a fuser issue, i'd rule out itb cleaning as the rest on the txt image is good
    I have everything cleared and what should. Only the tranfer belt yet. The blocks come and go way back, erratic. Annex yet clear jpg
    Patrick
    Attached Images Attached Images

  4. #14
    Service Manager 5,000+ Posts
    MP C5501 I regularly get colored cubes

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: MP C5501 I regularly get colored cubes

    Did you see my post above about firmware & MUSIC etc?
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  5. #15
    Technician
    Join Date
    Aug 2016
    Location
    Brugge
    Posts
    33
    Rep Power
    16

    Re: MP C5501 I regularly get colored cubes

    Quote Originally Posted by copier tech View Post
    Did you see my post above about firmware & MUSIC etc?
    I'll do it tomorrow and let you know.
    Patrick

  6. #16
    Service Manager 1,000+ Posts
    MP C5501 I regularly get colored cubes


    Join Date
    Nov 2007
    Location
    New Jersey
    Posts
    1,661
    Rep Power
    86

    Re: MP C5501 I regularly get colored cubes

    Don't drive yourself crazy with this, just go ahead and replace the ITB cleaning unit and all will be well.

  7. #17
    Service Manager 5,000+ Posts
    MP C5501 I regularly get colored cubes

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: MP C5501 I regularly get colored cubes

    I agree, take a spare ITB & cleaning unit from a spare machine if you can
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  8. #18
    Technician
    Join Date
    Aug 2016
    Location
    prince george
    Posts
    21
    Rep Power
    16

    Re: MP C5501 I regularly get colored cubes

    when you take the itb out flip it over and have a good look along the edge. we have had alot of them tear along the rear edge, then when it goes by it creates a bump mark. just food for thought.

  9. #19
    Technician
    Join Date
    Aug 2016
    Location
    Brugge
    Posts
    33
    Rep Power
    16

    Red face Re: MP C5501 I regularly get colored cubes

    Quote Originally Posted by tnelson View Post
    when you take the itb out flip it over and have a good look along the edge. we have had alot of them tear along the rear edge, then when it goes by it creates a bump mark. just food for thought.
    Thanks everyone. I installed a new cleaning unit on the belt and everything was ok.
    I had the old blown out with an air compressor, but this is not sufficient.
    Patrick

  10. #20
    Master Of The Obvious 10,000+ Posts
    MP C5501 I regularly get colored cubes

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: MP C5501 I regularly get colored cubes

    Quote Originally Posted by info@digitaalprint.be View Post
    Thanks everyone. I installed a new cleaning unit on the belt and everything was ok.
    I had the old blown out with an air compressor, but this is not sufficient.
    Patrick
    Congratulations. I didn't really think that compressed air would do anything to improve a warped or worn cleaning blade. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here