[Vesigoth]

I'm having several problems with this machine. The fuser is not heating up and I'm not getting any code even after 10 minutes of "warming up". After reinitializing the hard drive in function 2, I reset all connectors on both hard drives and on main board. Also cassette # 2 and LCC are not shown on the display although the paper lift motors do lift the paper. I load a document on the ADF and the document is taken in and spat out of the ADF but the scanner doesn't move although it does move when power is turned on. I've replaced the fuser unit and the IH board in front of the fuser unit and no help. If you've seen these problems before please help.