Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 38
  1. #21
    Senior Tech 250+ Posts
    Join Date
    Nov 2011
    Location
    Jacksonville, Fl
    Posts
    388
    Rep Power
    33

    Re: MX-M354N Err Failed to expand ARM9 prg

    Quote Originally Posted by repn1999 View Post
    The reason it's odd is because the machine has no hard disk so the stuff that would normally be on the HDD are then stored on the larger SD card. That file was created off a factory 8gb card. The reason you use a 8 GB card for the machines that take a 4gb card is because not all 4gb cards are 4008mb. Some are only 3998 or 4001 and they will fail like yours did. The same goes for 8gb cards. Not all are 8008 MB. So the easiest thing to do is buy a 16gb card.
    OK so that's why its so big, its an image of an 8gb card...My luck walmart only had sandisk brand.

  2. #22
    Senior Tech 250+ Posts
    Join Date
    Nov 2011
    Location
    Jacksonville, Fl
    Posts
    388
    Rep Power
    33

    Re: MX-M354N Err Failed to expand ARM9 prg

    I don't see the emanual or watermark fw on your FTP site. Will the machine work without it?

  3. #23
    Senior Tech 250+ Posts
    Join Date
    May 2010
    Location
    Dallas, TX
    Posts
    310
    Rep Power
    38

    Re: MX-M354N Err Failed to expand ARM9 prg

    When you change the SD card the machine will come up in boot mode automatically. Just copy the firmware to a USB stick and point it to it from there. Front USB works just fine on these

  4. #24
    Senior Tech 250+ Posts
    Join Date
    May 2010
    Location
    Dallas, TX
    Posts
    310
    Rep Power
    38

    Re: MX-M354N Err Failed to expand ARM9 prg

    Quote Originally Posted by Don N. View Post
    I don't see the emanual or watermark fw on your FTP site. Will the machine work without it?
    I'll put in the folder if you need it when I get back to the shop. It will throw a u2-50 or u2-60 if it's missing and is required

  5. #25
    Senior Tech 250+ Posts
    Join Date
    May 2010
    Location
    Dallas, TX
    Posts
    310
    Rep Power
    38

    Re: MX-M354N Err Failed to expand ARM9 prg

    There doesnt appear to be a E manual or watermark for this model as far as I can find on Sharp IDNC. If you get an error please let me know.

  6. #26
    Senior Tech 250+ Posts
    Join Date
    Nov 2011
    Location
    Jacksonville, Fl
    Posts
    388
    Rep Power
    33

    Re: MX-M354N Err Failed to expand ARM9 prg

    Customer says after unplugging a/c power (again) and network cable for first time, it's working now. I advised if the SD card is going bad as suspected, it will likely fail again, so we agreed I still need to replace it. I have the 8gb file & 16gb card, and main FW. (THANK YOU!).
    If I understand and read the matrix correctly, IF they have a HDD, I will need the 4gb file and put it on an 8GB card. I'm still looking for that 4GB file. Possibly VHi0MFP10005C ???

  7. #27
    Senior Tech 250+ Posts
    Join Date
    May 2010
    Location
    Dallas, TX
    Posts
    310
    Rep Power
    38

    Re: MX-M354N Err Failed to expand ARM9 prg

    I dont have a copy of the SD card you need if you have a HDD in the machine. I wish I did but we have never sold one in that config.

  8. #28
    Senior Tech 250+ Posts
    Join Date
    Nov 2011
    Location
    Jacksonville, Fl
    Posts
    388
    Rep Power
    33

    Re: MX-M354N Err Failed to expand ARM9 prg

    Thanks repn1999. Is there an easy way to id if it has a HDD? Either an external sticker applied by dealer on the back or an indication on a printed config sheet the customer could send me? Konicas say HDD installed on their config sheets.

  9. #29
    Senior Tech 250+ Posts
    Join Date
    May 2010
    Location
    Dallas, TX
    Posts
    310
    Rep Power
    38

    Re: MX-M354N Err Failed to expand ARM9 prg

    the HD-12 hard drive expansion kit installs on the back of the mfp board unit, and there is a sata hard drive cable that routes from the back and plugs into the mfp board. Also it appears that the 4GB sd card is blue in color and the 8gb card is black. That should help identify which you have.

  10. #30
    Senior Tech 250+ Posts
    Join Date
    Nov 2011
    Location
    Jacksonville, Fl
    Posts
    388
    Rep Power
    33

    Re: MX-M354N Err Failed to expand ARM9 prg

    repn1999- A million thanks. Have a great weekend!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here