Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15
  1. #11
    Field Supervisor 500+ Posts
    Kyocera FS-3640MFP continual  adding toner message


    Join Date
    Oct 2010
    Posts
    815
    Rep Power
    45

    Re: Kyocera FS-3640MFP continual adding toner message

    After changing the main board you'll get the C0180 code. Go into MM004 to clear the 0180 code.

  2. #12
    Service Manager 1,000+ Posts
    Kyocera FS-3640MFP continual  adding toner message

    copiertec's Avatar
    Join Date
    Jan 2016
    Location
    Centereach, L.I. New York
    Posts
    2,161
    Rep Power
    101

    Re: Kyocera FS-3640MFP continual adding toner message

    After replacing Main Board we still have the issue. Back to the drawing board.

  3. #13
    Service Manager 1,000+ Posts
    Kyocera FS-3640MFP continual  adding toner message

    copiertec's Avatar
    Join Date
    Jan 2016
    Location
    Centereach, L.I. New York
    Posts
    2,161
    Rep Power
    101

    Re: Kyocera FS-3640MFP continual adding toner message

    Retracing all of my steps, I believe the issue started after performing U002 (resetting factory default data). I have used this mode on other models and have not had any issues. I'm wondering if it lost rom data from the factory and has no reference point for toner?

  4. #14
    Senior Tech 250+ Posts
    Join Date
    Dec 2013
    Posts
    368
    Rep Power
    25

    Re: Kyocera FS-3640MFP continual adding toner message

    It will do the toner initial adding if you performed U002. You will have to wait for it to finish. There is one more thing to be checked in this case. That's the developer drive gear which breaks every now and then:

    dev_drive_gear.jpg

  5. #15
    Service Manager 1,000+ Posts
    Kyocera FS-3640MFP continual  adding toner message

    copiertec's Avatar
    Join Date
    Jan 2016
    Location
    Centereach, L.I. New York
    Posts
    2,161
    Rep Power
    101

    Re: Kyocera FS-3640MFP continual adding toner message

    Quote Originally Posted by Kyo fan View Post
    It will do the toner initial adding if you performed U002. You will have to wait for it to finish. There is one more thing to be checked in this case. That's the developer drive gear which breaks every now and then:

    dev_drive_gear.jpg
    You were spot on Kyo fan... thank you. I let it run and it came to ready.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here