Results 1 to 7 of 7
  1. #1
    Senior Tech 100+ Posts
    HP 4014 not feeding paper


    Join Date
    Jul 2016
    Posts
    127
    Rep Power
    17

    HP 4014 not feeding paper

    Hello all,
    I'm working on a 4014. The printer is not feeding paper, I replaced the PF solenoid but still the same, clutch works fine as I can manually initialize feed at the solenoid.
    Machine runs cycle to the point of initiating solenoid but never does, then repeats a run cycle for about ten seconds then again no solenoid action.

    So I suspect the DC controller P#-RM1-5047/ 49.

    Has anyone had a DC controller do this?
    Thanks
    When I started servicing copiers they used toaster ovens for fusers.....I'm old

  2. #2
    Service Manager 1,000+ Posts
    HP 4014 not feeding paper


    Join Date
    Jun 2015
    Location
    Lutherville, MD
    Posts
    1,048
    Rep Power
    44

    Re: HP 4014 not feeding paper

    Had a similar issue on an M60x series. Turned out the tip of one of the sensor flags on the pickup assembly broke off causing the printer to act like your describing. RM1-4562 - Paper feed shaft Z assembly.

  3. #3
    Service Manager 1,000+ Posts theengel's Avatar
    Join Date
    Nov 2011
    Location
    North Bend
    Posts
    1,780
    Rep Power
    51

    Re: HP 4014 not feeding paper

    I had a weird problem like this, but I can't remember if it was the exact symptoms. I ended up replacing the DC controller, and that did not help. Finally, as I was pulling out the toner ctg, I noticed that the orange tab hadn't been pulled off. I did this, and everything started working. Again, I don't remember the exact symptom, I just remember that the problem and symptom did not match at all.

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Nov 2013
    Location
    Sydney
    Posts
    155
    Rep Power
    24

    Re: HP 4014 not feeding paper

    The symptom theengel is the machine says there is no paper in the tray even though there is. Had several calls like that.

  5. #5
    Senior Tech 100+ Posts
    HP 4014 not feeding paper


    Join Date
    Jul 2016
    Posts
    127
    Rep Power
    17

    Re: HP 4014 not feeding paper

    Turned out that the fuser was the cause
    When I started servicing copiers they used toaster ovens for fusers.....I'm old

  6. #6
    Field Supervisor 500+ Posts Wild Bill's Avatar
    Join Date
    Jul 2005
    Location
    Fresno, California
    Posts
    774
    Rep Power
    55

    Cool Re: HP 4014 not feeding paper

    Off the subject...Your signature...

    "When I started servicing copiers they used toaster ovens for fusers.....I'm old"

    Any chance these were Sharp SF-741 series? That was awhile ago am I right?
    Had to have a pair of bamboo tongs when they jammed and damn near caught on fire, other techs told me they did catch but I just saw after the fact.
    Izzy

  7. #7
    Senior Tech 100+ Posts
    HP 4014 not feeding paper


    Join Date
    Jul 2016
    Posts
    127
    Rep Power
    17

    Re: HP 4014 not feeding paper

    Yes, the SF 741 came with bamboo tongs, haha. Toughest repair on those was when the drum hubs broke.
    Worked on those day in and day out, and wish I had one of those copiers now to keep as a collectable
    When I started servicing copiers they used toaster ovens for fusers.....I'm old

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here