Maybe is not clear from the attachments but the yellow also has the same line.So we have the same line at the same place on cyan,magenta and yellow.what i checked until now is almost everything,lazer,dev units,drum units and transfer belt.The thing that makes me crazy is that the black has no line on it.i am waiting from your experience to understand whats the problem and i have this line to all colours but no at the black,thanks again.
I'd check the underside of the Cyan PCDU for anything that might be rubbing on the ITB and causing the line.
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
measure from the first line down to the next showing of the line.. in the manual it should tell you what component is to blame... the repetitive ruler ( in mm ) is you best tool for repetitive marks in the manual
the copies of the specific mashine(proc651)are all very good except the line is show with the arrow.The other lines that show up is why i used an old mpc2800 to scan the copies to transfer into the site here,so forget the other lines you see.the only real white line that there is is that i point with the arrow,thanks
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
Now that you clarified the reason your sample looks bad,your back at the laser unit as the problem as per Slim's post.
Good luck
Hello to everyone i would like to thank you all for your interest about my problem.The problem is now solved.There was a foreign substance under the black pcu(many thanks to mrwho who gave me the idea)
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
Bookmarks