Originally Posted by
Synthohol
this needs to be followed EXACTLY
Problem
Security lines on copies
Solution
CAUSE: Initial settings did not take when programmed.
SOLUTION: Time and date, telephone and ADF serial numbers need to be reentered:
1. Sub-power ON Utility/Counter Machine Admin settings System settings Date and time setting (Enter year/month/day/time) OK Exit Power OFF sub-power switch.
2. Enter Service Mode System settings Setup date input (Enter year/month/day) OK.
CAUTION: DO NOT POWER OFF. Leave machine in Service Mode.
3. In the Service Mode System settings Telephone setting (Enter 16-digit number) OK. Repeat for the fax number. Set to all 9s if there is no fax number.
CAUTION: DO NOT POWER OFF. Leave machine in Service Mode.
4. In the Service Mode System settings M/C serial number setting touch ADF (Enter ADF serial number) OK Power OFF sub-switch.
5. Power ON sub-switch and run copies with no security lines.
Bookmarks