Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: task Alfa 8100

  1. #11
    Master Of The Obvious 10,000+ Posts
    task Alfa 8100

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: task Alfa 8100

    Quote Originally Posted by blackcat4866 View Post
    Google high volume machines. =^..^=
    Damn Auto-Correct.

    Good high volume machines!
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  2. #12
    Senior Tech. 2,500+ Posts NeoMatrix's Avatar
    Join Date
    Nov 2010
    Location
    Sunshine State QLD.
    Posts
    3,514
    Rep Power
    104

    Re: task Alfa 8100

    Quote Originally Posted by blackcat4866 View Post
    Google high volume machines. =^..^=

    google <tap tap tap... > "high volume machines"

    ---------- google result ---------------
    15,900,000 results

    Date All Past 24 hour Past Week Past Month Language Only English

    Region only from Australia

    --------------------------------

    15,900,000 pages...
    Hang on while a grab a cuppa coffee....



    Shouldn't take me long......




    Maybe a couple of years .... lol...
    Inauguration to the "AI cancel-culture" fraternity 1997...
    •••••• •••[§]• |N | € | o | M | Δ | t | π | ¡ | x | •[§]••• ••••••

  3. #13
    Junior Member
    Join Date
    Jun 2017
    Posts
    7
    Rep Power
    0

    Re: task Alfa 8100

    Good machine in general, here in Oz Kyo machines seem to eat fusers reliably.

    If you have worked on Kyo previously you would know that MK kits MUST be replaced on time, and machines cleaned internally, they all tend to run a little dirty.

  4. #14
    Field Supervisor 500+ Posts ntbann's Avatar
    Join Date
    Jan 2012
    Location
    Port Huron
    Posts
    577
    Rep Power
    34

    Re: task Alfa 8100

    I would also like to know how you ger150k out of the feed rollers. I cant get 75k before they start jamming. that's why we started using the Konica rollers.

  5. #15
    Senior Tech 100+ Posts
    Join Date
    Jul 2014
    Posts
    188
    Rep Power
    22

    Re: task Alfa 8100

    Quote Originally Posted by habik View Post
    Could you share what paper your school is using please? What spec and brand and type, if you can.

    From Kyo rollers I never got more than 70-90k(reliably)

    I did get 150k from KM rollers.

    Yah and clutches are good talk over a pint. Actuators should be made of metal, I suggest. Then it would be PM to PM.

    All I know is that it's some cheap Magtec stuff. It's a school after all.

    The machines are run by students and they generally don't call in a jam or two. When I get around to clearing jam counts, there might be only a handful of misfeeds (<5). Clean them off a little bit and let them keep on trucking.

    The difference between the previous rollers and the Alphard II pinch tab rollers was night and day for us.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here