 Help me feed my e-Studio 28...
Two days ago I added a GD-1080 fax board to an e-Studio 28. Configured/initialized and checked it out...it works great. Next, I replaced the working 1040 controller with a used (worked fine on previous machine) 1010 controller. Turned it on and everything seems to be working ok EXCEPT... it won't take anything from the Automatic Document Feeder. It worked perfectly before. The only involvement with the ADF was unpluging it to take the back off, and I DID plug it back in. Shouldn't the controller already recognize the ADF? Anything obvious I'm missing here? |