| ivovb, thanks again for your help. The fax board is installed in the machine already, im not too sure how to look at the two pins named W1 and W2. I assume they are set correctly as this machine was purchased from another person living in the US.
I also checked the 08 mode to ensure that it was set to USA and it was.
I performed the 1* mode init and tried again.
I am able to send fine but receiving I get errors:
76839501/27/2009 15:18:0900:540FAXBACK EC5 00B3Line1
76739201/27/2009 15:00:4300:480FAXBACK EC5 00B3Line1
Do you have any other ideas that I could try including slowing down the communication lines?
Oh, BTW, I have hooked another phone to this line to check for line static or other problems but dont seem to hear any.
Thanks again for all your help.
-Jim |