Results 1 to 5 of 5
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Jul 2010
    Location
    Buffalo, NY
    Posts
    227
    Rep Power
    32

    Workcentre 5225A

    After erasing the HDD what is required and what is the procedure for reloading firmware?

    Background for those interested...Ricoh tech and we took over a xerox account and the salesman promised them we would securely erase the hdd before sending it back to the leasing company.
    I found some instructions for using a thumbdrive with an /altboot folder but they reference a .dlm file and the firmware i downloaded from xerox is a .bin

    Thx

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Jun 2013
    Location
    VA
    Posts
    218
    Rep Power
    26

    Re: Workcentre 5225A

    Initializing the HDD will have no effect on the rest of the machine. To reload FIRMWARE it is a .bin file that can be found on then Xerox website. The Altboot procedure you are referencing is for System Software in which case will be a .dlm file The Altboot procedure is to recover from a corrupt HDD and similiar issues that would require the reloading of system software.
    I would recommend that you Initialize the HDD, and system. This will wipe the HDD and all user settings. The leasing company will not care if the machine has the latest firmware or not.

    Hope this helps

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Jul 2010
    Location
    Buffalo, NY
    Posts
    227
    Rep Power
    32

    Re: Workcentre 5225A

    Thx for the reply.

    per the customer we have to securely erase the hdd. we have a device thats similar to dban that prints out a label with the drive info stating the erasure method etc...

    so to make the machine functional again you are saying we need to load the .dlm file with altboot? and the .dlm file is not on the xerox site open to the public?

  4. #4
    Service Manager 1,000+ Posts
    Workcentre 5225A

    adriansto's Avatar
    Join Date
    Nov 2007
    Location
    Somewhere in Europe near Black Sea
    Posts
    2,237
    Rep Power
    71

    Re: Workcentre 5225A

    This type of machine dont support altboot procedure.
    Remove and erase the hdd then put it back into machine.

  5. #5
    Senior Tech 100+ Posts
    Join Date
    Jul 2010
    Location
    Buffalo, NY
    Posts
    227
    Rep Power
    32

    Re: Workcentre 5225A

    ty

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here