Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Junior Member LMP's Avatar
    Join Date
    Oct 2017
    Location
    Manila
    Posts
    6
    Rep Power
    0

    ImageRunner Adavance C2225i - Cannot remove ITB assy.

    Hi guys! Any idea what is causing for the ITB to be locked inside and cannot be pull-out even after removing the drum cartridges. After a couple of test it is now giving an error E000070-0000.


    Thanks in advance!

  2. #2
    Senior Tech 250+ Posts JPiek's Avatar
    Join Date
    Oct 2014
    Location
    The Netherlands
    Posts
    435
    Rep Power
    27

    Re: ImageRunner Adavance C2225i - Cannot remove ITB assy.

    E000070-0002
    Error code E000070-0001

    Reading these I asume your ITB is FUBAR/Torn/Ripped and STUCK...

    Open drawer2, open frontdoor, remove screw(s) of the left panel, remove left panel. Remove screw(s) of the output bin (where your prints come out). Remove outputbin...

    Now you're looking at the top of the ITB... If it's a mess, it's scr*wed...
    Johan

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Mar 2017
    Location
    bloemfontein
    Posts
    91
    Rep Power
    15

    Re: ImageRunner Adavance C2225i - Cannot remove ITB assy.

    hi there..this might be a stuiped question...when you opened the right door...did u press clips to open right door fully.if you just open it to clips then ITB is still engaged.

  4. #4
    Tech Specialist 1,000+ Posts Canuck's Avatar
    Join Date
    Nov 2007
    Location
    Southwestern Ontario
    Posts
    1,713
    Rep Power
    63

    Re: ImageRunner Adavance C2225i - Cannot remove ITB assy.

    Go into service mode and enable to display itb replacement in user mode. Then go to maintenance in user mode and execute it. This will move necessary parts out of way to remove it unless torn belt is hung up

  5. #5
    Service Manager 10,000+ Posts
    ImageRunner Adavance C2225i - Cannot remove ITB assy.

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: ImageRunner Adavance C2225i - Cannot remove ITB assy.

    Quote Originally Posted by LMP View Post
    Hi guys! Any idea what is causing for the ITB to be locked inside and cannot be pull-out even after removing the drum cartridges. After a couple of test it is now giving an error E000070-0000.


    Thanks in advance!

    ITB assembly is stuck in the machine and cannot be removed.
    _
    The door interlock was popped out of place, not allowing the right door to open properly,
    preventing the ITB assembly from being removed.

    Please see the photo below for the proper position of the door interlock.


    See if the circular tab has popped out of the rectangular space in the arm.

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #6
    Junior Member LMP's Avatar
    Join Date
    Oct 2017
    Location
    Manila
    Posts
    6
    Rep Power
    0

    Re: ImageRunner Adavance C2225i - Cannot remove ITB assy.

    First of all thank you guys for replying to my question here, I really appreciate that.

    ITB replacement mode is not working even after saying that i can now replace the ITB.

    The Door Interlock is in the proper position when and i think its working fine.

    What I did is manually i rotated this motor (see picture attached) to release/re-align the gear to unlock the ITB. after that i pulled out the ITB without a problem. and also after switching the ITB to other machine i found out that the ITB is really faulty, and also on that other machine i also need to rotate that motor to release the ITB. idk if this is a common issue with this machine or am i doing something wrong. I am new in Canon hopefully someone can enlighten me with this issue. Thanks again guys for your inputs and suggestions!

    IMG_20171003_123512.jpg

  7. #7
    Senior Tech 250+ Posts JPiek's Avatar
    Join Date
    Oct 2014
    Location
    The Netherlands
    Posts
    435
    Rep Power
    27

    Re: ImageRunner Adavance C2225i - Cannot remove ITB assy.

    I don't think you're doing something wrong, I asume the ITB from the other machine could be removed normally ?
    Removing and ITB in a 20xx or 22xx is as easy as opening the right door, pressing the clips and lowering the door and pulling the ITB out..

    I think some axel or something broke in the fauty ITB, thus locking it in place... The mentioned error E070 about the ITB not geting in the right position support that theory.. as does the fact you have to rotate the motor manualy on both printers...
    Johan

  8. #8
    Junior Member LMP's Avatar
    Join Date
    Oct 2017
    Location
    Manila
    Posts
    6
    Rep Power
    0

    Re: ImageRunner Adavance C2225i - Cannot remove ITB assy.

    Quote Originally Posted by JPiek View Post
    I don't think you're doing something wrong, I asume the ITB from the other machine could be removed normally ?
    Removing and ITB in a 20xx or 22xx is as easy as opening the right door, pressing the clips and lowering the door and pulling the ITB out..

    I think some axel or something broke in the fauty ITB, thus locking it in place... The mentioned error E070 about the ITB not geting in the right position support that theory.. as does the fact you have to rotate the motor manualy on both printers...

    Hi JPiek! Actually i need to rotate the motor manually for both of the machine when removing the other ITB also, that's why i think maybe i'm doing something wrong when pulling out the ITB? I didn't press any clips but i remove the 2 screw that is holding the right door so i can lower it and pulling back the interlock. do you think that is the problem?

  9. #9
    Senior Tech 250+ Posts JPiek's Avatar
    Join Date
    Oct 2014
    Location
    The Netherlands
    Posts
    435
    Rep Power
    27

    Re: ImageRunner Adavance C2225i - Cannot remove ITB assy.

    I thought you only had the remove-problem with the old one...
    You really don't need to remove any scews for the ITB to be removed...
    Put 'em back and lower the rightdoor as below..


    ITB removal.jpg
    Johan

  10. #10
    Tech Specialist 1,000+ Posts Canuck's Avatar
    Join Date
    Nov 2007
    Location
    Southwestern Ontario
    Posts
    1,713
    Rep Power
    63

    Re: ImageRunner Adavance C2225i - Cannot remove ITB assy.

    This is why you run itb replacement before attempting to remove the assembly..obviously something got damaged on itb assembly

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here