20171108_173616.jpg 20171108_173616 - copia.jpg
c8000
i get colors like this, like whiteish like scratchy, not a solid color
how can i correct this please
thank you
20171108_173616.jpg 20171108_173616 - copia.jpg
c8000
i get colors like this, like whiteish like scratchy, not a solid color
how can i correct this please
thank you
Check out this color quality guide. Might help you out. Especially the Blurry/Blotchy copies area.Color Quality Guide.pdf
What have you done so far? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Thanks both
I adjusted max density to some values and to 0
I ran gamma adjustment
Check if my transfer belt not miscentered
Check registration loop adj
Set printer to best quality > speed
I notice that yellow looks rock solid
But others are not
Today replaced 2nd transfer belt and nothing still same problem
What are the life of your image units?
Paper quality has a HUGE influence on print quality.
Also check your firmware is upto date.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
thanks,
its latest firmware
same paper its working with anothers c8000
today i tried with a different intermediate transfer belt
cleaned the IDC and registration sensors with hydrowipe
and still the same
so i guess the error is up to fusing section
Its just just i cant allocate it yet
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
It looks like primary or secondary transfer to me, which includes paper as a possibility. How heavy is the media? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Bookmarks