SC 554 you well need the reset fuse in the fuser unit or new fuser
It well not clear without this
SC 554 you well need the reset fuse in the fuser unit or new fuser
It well not clear without this
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
If the sleeve is not damaged just replace SC554 Fuse M0264371
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Hello there.
How did you manage to solve this? Replaced the fuser (sleeve was destroyed), replaced the bicu (as per the manual) and firmware is up to date. Still sc554. And yes, it's a mpc305 (a4 machine).
Cheers!
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Fuse? Never noticed that mpc305 had any fuse... Where does it connect to?
And why doesn't the manual mention it, just telling to replace the bicu?
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
Got it. I'm pissed that the manual doesn't even mention the fuser replacement for this code, just the bicu.
IMG_20171220_124806-01.jpg
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
Thanks for the pic.
How much did the BICU cost or did you fit a used one?
A lot more that a 1p fuse!
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
i made a small kit with a old connector from a thermister and an old small door switch with about 6 feet of thin alarm wire.
I connect this to where that pico fuse wld go and turn on copier and go into service mode and
Enter SP mode and goto SP5810-002.Before you tap execute push and hold the switch in. hit execute and release..
it took me a few tries to get the timing right..
I only did this after mt machine refused to blow that danm pico fuse with a new fuser sleeve...........
Radial lead fuse such as TR5 of the correct amperage should work. Might have to trim lead.
TR5 Fuses - Littelfuse
Bookmarks