Hi, All. I hope your day is going well. There is a new PCU rebuild kit for the C4503, and I was just wondering if anyone has tried these. They are under consideration due to the astronomical cost of new oem unit replacement.
Hi, All. I hope your day is going well. There is a new PCU rebuild kit for the C4503, and I was just wondering if anyone has tried these. They are under consideration due to the astronomical cost of new oem unit replacement.
NEVER ASSUME ANYTHING
No, they are under consideration.
NEVER ASSUME ANYTHING
We have been using these for about 6 months with quit good results but on some units we have had the blade stick and flip over
the copy quality is also good for the price they are worth looking at in the UK you can buy the units pre built for you but cost £200.00 still a saving and saves about 40 min of the Engineers time.
By the time the copier needs drums etc its in its last 18 months so you don't want to spend large amounts of money on them and not get it back in meter click.
who makes these kits?
my experience with aftermarket drums is I found the German and the ones from Japan much more reliable
and a much harder surface.At the price seen here I would say at least try one for a black drum
replacement and see how it does..
Slot, where in the UK do you get these from ?
Bookmarks