Thanks: 
Likes: 
Dislikes: We have a C554e that when turned on will start the boot up for 2 seconds then turn off and then start all over again.
Anyone run into this before?
We have a C554e that when turned on will start the boot up for 2 seconds then turn off and then start all over again.
Anyone run into this before?
Is the SSD , the 4 series has this problem .
I hope I got the correct model range. SSD needs to be version 6.05 and the latest firmware. If it is then replace ssd.
It was the SSD, thanks a ton for the help!!!!
Where did you get an SSD board in 6 hours after reporting this issue!?Originally Posted by GR81
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
From another C554e we are parting out.
just curious, did it carry over the meters from the parts machine?
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
This is why I asked never fitted a used SSD only new!
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Yes it did, along with all it's other settings.
Reply With Quote
Bookmarks