Results 1 to 4 of 4
  1. #1
    Senior Tech 250+ Posts
    Join Date
    Jun 2016
    Posts
    456
    Rep Power
    23

    MX7040/MX7580 sec transfer belt rips

    Still having a lot of trouble with secondary transfer belts ripping on these machines.

    Does anyone have a solution for this?

    Yesterday i had to replace one that had been in the machine for only 4 days!

    No idea what causes this...

  2. #2
    Trusted Tech 50+ Posts r3d343420's Avatar
    Join Date
    Aug 2012
    Location
    Berthoud, CO
    Posts
    55
    Rep Power
    24

    Re: MX7040/MX7580 sec transfer belt rips

    In my experience I have seen 2 things cause this. 1st, check the primary transfer belt cleaning assembly is not binding up. I have had this on more than one occasion. The cleaning assembly will bind up the rest of the belt causing the secondary to slip and eventually rip. The second cause that i have only seen once is the right door being bent and not closing correctly.

  3. #3
    The Wolf 2,500+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    Cleveland OH
    Posts
    2,512
    Rep Power
    125

    Re: MX7040/MX7580 sec transfer belt rips

    Quote Originally Posted by boutn View Post
    Still having a lot of trouble with secondary transfer belts ripping on these machines.

    Does anyone have a solution for this?

    Yesterday i had to replace one that had been in the machine for only 4 days!

    No idea what causes this...
    I agree as this model has a tendency to clog in the waste toner tubes. Also make sure the main, front door is not clogged. I have seen this a few time and you will actually find a METAL auger, metal is so rare in this day and age.

    The other thing to check is the sep finger on the IT belt. This is to be replaced when the IT belt is replaced. If your tears are right down the center, this finger is the most likely cause.


    Failing to plan is planning to fail!!!

  4. #4
    Senior Tech 250+ Posts
    Join Date
    May 2010
    Location
    Dallas, TX
    Posts
    310
    Rep Power
    38

    Re: MX7040/MX7580 sec transfer belt rips

    I have also seen this when techs don't powder both belts and blades properly.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here