Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1
    bua99
    Guest

    Problem copy from ADF canon ir3300

    Dear all,
    I have problem with my canon ir3300, if copy in plate glass it's good,
    But, when i copy from ADF, the margin different with original, it's different about 3 cm then original.
    Notes: i use paper 215x330 cm.

    Thx for your help.

  2. #2
    Field Supervisor 500+ Posts
    Join Date
    Sep 2011
    Posts
    849
    Rep Power
    37

    Re: Problem copy from ADF canon ir3300

    lead edge? trail edge? inboard, outboard? Which direction?

    Quote Originally Posted by bua99 View Post
    Dear all,
    I have problem with my canon ir3300, if copy in plate glass it's good,
    But, when i copy from ADF, the margin different with original, it's different about 3 cm then original.
    Notes: i use paper 215x330 cm.

    Thx for your help.

  3. #3
    Service Manager 10,000+ Posts
    Problem copy from ADF canon ir3300

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Problem copy from ADF canon ir3300

    Quote Originally Posted by bua99 View Post
    Dear all,
    I have problem with my canon ir3300, if copy in plate glass it's good,
    But, when i copy from ADF, the margin different with original, it's different about 3 cm then original.
    Notes: i use paper 215x330 cm.

    Thx for your help.


    U1: FOOLSCAP
    -- is your paper tray set for U1
    COPIER>OPTION>BODY>SCANSLCT
    - set to "0"
    Use it to enable or disable the original size detection mechanism for the
    ADF.
    When enabled, the scan size is determined in relation to the original
    size.

    Settings = 0: off (default), 1: on

    COPIER>OPTION>BODY>SENS-CNF-set to "0"
    Use it to set the arrangement of the original sensors.
    Settings = 0: AB-configuration (default, 1: Inch-configuration, 2: A-configuration)
    Caution- If you have changed the arrangement of the original sensors, select the appropriate
    setting to suit the new arrangement.

    COPIER>OPTION>USER>MF-LG-ST-set to "1"
    Use it to indicate the Extra Length key for paper up to 630 mm long
    (multifeeder, free; the ADF will also accommodate paper up to 630 mm
    long).

    Settings = 0: normal mode (default), 1: extra length mode (key indicated)
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  4. #4
    Junior Member
    Join Date
    Aug 2018
    Location
    Hyderabad
    Posts
    9
    Rep Power
    0

    Re: Problem copy from ADF canon ir3300

    Dear member,
    I have problem with my canon ir 3300 while coping from ADF, paper options are not coming in the feeder settings, how to obtain that. Can any one guide me.

    Udayan

  5. #5
    Service Manager 10,000+ Posts
    Problem copy from ADF canon ir3300

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Problem copy from ADF canon ir3300

    Quote Originally Posted by udayan View Post
    Dear member,
    I have problem with my canon ir 3300 while coping from ADF, paper options are not coming in the feeder settings, how to obtain that. Can any one guide me.

    Udayan

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #6
    Junior Member
    Join Date
    Aug 2018
    Location
    Hyderabad
    Posts
    9
    Rep Power
    0

    Re: Problem copy from ADF canon ir3300

    Sir, I can't see the options as you shown in the video. I like to know how to obtain the options. Like A4, A3, etc.
    My machine not showing the paper options, there. thanks,

    Udayan

  7. #7
    Service Manager 10,000+ Posts
    Problem copy from ADF canon ir3300

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Problem copy from ADF canon ir3300

    Quote Originally Posted by udayan View Post
    Sir, I can't see the options as you shown in the video. I like to know how to obtain the options. Like A4, A3, etc.
    My machine not showing the paper options, there. thanks,

    Udayan

    Sorry, wrong model on video ----disregard

    -----------------------------------------------------------------

    In service mode

    COPIER>OPTION>BODY


    MODEL-SZ
    Use it to select the mode of indication by destination and of the ADF original
    size detection.

    Settings
    0: AB (6R5E),
    1: INCH (5R4E),
    2: A (3R3E),
    3: AB/INCH (6R5E)


    COPIER>OPTION>BODY>SCANSLCT


    Use it to enable or disable the original size detection mechanism for the
    ADF.
    • When enabled, the scan size is determined in relation to the original
    size.
    Settings
    0: off (default),
    1: on

    COPIER>OPTION>USER
    MF-LG-ST
    Use it to indicate the Extra Length key for paper up to 630 mm long (multifeeder, free; the ADF will also accommodate paper up to 630 mm
    long).
    Settings: 0: normal mode (default), 1: extra length mode (key indicated)

    ================================================== ======
    is this how your control panel screen shows
    Paper Select.jpg





    In service mode

    COPIER>OPTION>ACC


    DK-P
    Use it to select a paper size for use in the paper deck.
    Caution After making a selection, be sure to turn off and then on the main power
    switch.
    Settings 0: A4 (default), 1: B5, 2: LTR, 3: A-LTR


    Have you done this cassette adjustments ??????????
    Cassette Size.jpg
    Cassette Size2.jpg
    AB Switch.jpg
    Rotary Label.jpg
    Last edited by teckat; 09-02-2018 at 05:09 AM.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  8. #8
    Junior Member
    Join Date
    Aug 2018
    Location
    Hyderabad
    Posts
    9
    Rep Power
    0

    Re: Problem copy from ADF canon ir3300

    sir, i will try this and see whether the options in feeder and feedsize coming or not. then i will reply to you thanks in advance.

    udayan

  9. #9
    Service Manager 10,000+ Posts
    Problem copy from ADF canon ir3300

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Problem copy from ADF canon ir3300

    Quote Originally Posted by udayan View Post
    sir, i will try this and see whether the options in feeder and feedsize coming or not. then i will reply to you thanks in advance.

    udayan

    what happened ?????????????
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  10. #10
    Junior Member
    Join Date
    Aug 2018
    Location
    Hyderabad
    Posts
    9
    Rep Power
    0

    Re: Problem copy from ADF canon ir3300

    [QUOTE=teckat;698400]
    Nothing i can't have size in FEEDSIZE, as well as i can't see TRY-WIDE. can you help me, i think there is problem with some settings.

    udayan

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here