Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1
    Technician ecnereht's Avatar
    Join Date
    Sep 2018
    Posts
    40
    Rep Power
    0

    Ricoh MP 2553 PRoblem

    Hi,

    We have a Ricoh MP 2553 Printers that causing black dots on every pages when printing.


    Please help.

    Thank you.

    TSL

  2. #2
    Service Manager 10,000+ Posts
    Ricoh MP 2553 PRoblem

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,656
    Rep Power
    658

    Re: Ricoh MP 2553 PRoblem

    Quote Originally Posted by ecnereht View Post
    Hi,
    We have a Ricoh MP 2553 Printers that causing black dots on every pages when printing.
    Please help.
    Thank you.
    TSL
    what is the distance between dots? have you looked in the manual for the defect ruler?

    did you try pulling the drum and looking for a spot on it?

  3. #3
    Technician ecnereht's Avatar
    Join Date
    Sep 2018
    Posts
    40
    Rep Power
    0

    Re: Ricoh MP 2553 PRoblem

    Quote Originally Posted by Phil B. View Post
    what is the distance between dots? have you looked in the manual for the defect ruler?

    did you try pulling the drum and looking for a spot on it?
    Im not sure for the distances of the dots but when I pulled the drum there are spots on it.

  4. #4
    Service Manager 1,000+ Posts
    Ricoh MP 2553 PRoblem

    guitar9199's Avatar
    Join Date
    Sep 2016
    Location
    Eveleth, MN
    Posts
    1,090
    Rep Power
    41

    Re: Ricoh MP 2553 PRoblem

    How many copies/prints on this machine? Drum and developer on this series is rated for 60K Copies.

  5. #5
    Just a tech 250+ Posts keithxxiii's Avatar
    Join Date
    Nov 2014
    Posts
    463
    Rep Power
    28

    Re: Ricoh MP 2553 PRoblem

    Quote Originally Posted by ecnereht View Post
    Im not sure for the distances of the dots but when I pulled the drum there are spots on it.
    Print the counter page then look for those dots. If the dots are repeating on the same measurement, then you have a problem on your drum. If the counter is above 60k from the last replacement, then you have to replace it together with the developer, blade and charge roller/brush.
    Aye! Cut the crap

  6. #6
    Retired 10,000+ Posts
    Ricoh MP 2553 PRoblem

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,126
    Rep Power
    989

    Re: Ricoh MP 2553 PRoblem

    Drum spots are a symptom of trying to go too far between PCU PM. Usually start to show up at the outer edges of the drum at about 75K. Trying anything other than PM with a new drum will only make it worse.

  7. #7
    Ricoh Fanboy 1,000+ Posts Oze's Avatar
    Join Date
    Jul 2008
    Location
    Toowoomba,QLD
    Posts
    1,662
    Rep Power
    63

    Re: Ricoh MP 2553 PRoblem

    Time to call a tech to service your machine.

  8. #8
    Technician ecnereht's Avatar
    Join Date
    Sep 2018
    Posts
    40
    Rep Power
    0

    Re: Ricoh MP 2553 PRoblem

    Quote Originally Posted by guitar9199 View Post
    How many copies/prints on this machine? Drum and developer on this series is rated for 60K Copies.
    Yeah, I believe its a drum problem. Its more than 60K copies. I thought I can still do something to extend more.

    TSL

  9. #9
    Technician ecnereht's Avatar
    Join Date
    Sep 2018
    Posts
    40
    Rep Power
    0

    Re: Ricoh MP 2553 PRoblem

    Quote Originally Posted by keithxxiii View Post
    Print the counter page then look for those dots. If the dots are repeating on the same measurement, then you have a problem on your drum. If the counter is above 60k from the last replacement, then you have to replace it together with the developer, blade and charge roller/brush.
    If the same measurement of the distance of the dots (only drum replacement?).
    If 60k above copies - replace all PCU unit?

    TSL

  10. #10
    Technician ecnereht's Avatar
    Join Date
    Sep 2018
    Posts
    40
    Rep Power
    0

    Re: Ricoh MP 2553 PRoblem

    Quote Originally Posted by slimslob View Post
    Drum spots are a symptom of trying to go too far between PCU PM. Usually start to show up at the outer edges of the drum at about 75K. Trying anything other than PM with a new drum will only make it worse.
    Sorry, but what is PM?

    TSL

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here