Hello
I got couple of Biz hub c 220 machines with Copy issue (Printouts OK) .Please check attachment.
Any help would be great.
Thank you
Hello
I got couple of Biz hub c 220 machines with Copy issue (Printouts OK) .Please check attachment.
Any help would be great.
Thank you
What have you done so far? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
When was the last time optics were cleaned and stabilization and calibration ran??
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Your issue is more than likely the scanner bed has dropped because there is no support at the front left corner. Get your hands underneath the scanner bed and lift it up. It might take a few attempts. I carefully use a car jack in the workshop to resolve this. Hope this helps
Yeah I hear you about the jack. If I showed up with a jack some of my customers would ask if I could rotate their tires while there
Bookmarks