Results 1 to 5 of 5
  1. #1
    Senior Tech 100+ Posts
    356ci new machine, Magenta everywhere!


    Join Date
    Aug 2010
    Location
    minneapolis, MN
    Posts
    246
    Rep Power
    30

    356ci new machine, Magenta everywhere!

    Hey all,
    I have a new 356ci that has less than 200 on the meter, machine ran fine during testing and after delivery, but a week or so later, customer calls about magenta on the whole page. I swapped drums, no change, inspected dev, contact plates, springs for transfer belt. At first I was thinking high voltage board, but then I covered part of the laser window with paper and the area that is covered is not affected, so now i'm leaning towards the LSU. Anyone else run into something like this on a brand new machine?

    Thanks,
    MNTECH


    for some reason I cannot upload these 2 pictures, so I will post links. The 2nd picture is with the laser glass partially covered.

    Dropbox - cs356ciMagenta1.jpg

    Dropbox - cs356ciMagenta2.jpg

  2. #2
    Trusted Tech 50+ Posts itchyfinger@att.net's Avatar
    Join Date
    Oct 2017
    Location
    Detroit, Mi
    Posts
    77
    Rep Power
    14

    Re: 356ci new machine, Magenta everywhere!

    any codes? maybe reseat magenta laser j connectors?

  3. #3
    Senior Tech 100+ Posts
    356ci new machine, Magenta everywhere!


    Join Date
    Aug 2010
    Location
    minneapolis, MN
    Posts
    246
    Rep Power
    30

    Re: 356ci new machine, Magenta everywhere!

    There were codes for failed registration (can't remember exact code) but I assumed this was due to the high coverage of magenta.

    I'll double check connections at laser and engine.

  4. #4
    Master Of The Obvious 10,000+ Posts
    356ci new machine, Magenta everywhere!

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: 356ci new machine, Magenta everywhere!

    Looks like a laser issue to me.

    Reseating connectors might help but I doubt it.

    I like your diagnostic method. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Senior Tech 100+ Posts
    356ci new machine, Magenta everywhere!


    Join Date
    Aug 2010
    Location
    minneapolis, MN
    Posts
    246
    Rep Power
    30

    Re: 356ci new machine, Magenta everywhere!

    Replacing the laser unit solved the problem.

    -mntech

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here