Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Junior Member
    Join Date
    Jul 2019
    Location
    Sofia
    Posts
    2
    Rep Power
    0

    bizhub c280 SMB2 support in firmware

    Hello, recently I acquired a bizhub c280 machine. I managed to set it up to scan to smb but I had to downgrade the minimum SMB version to smb1 and that's rather insecure w.r.t worms and other nasty viruses. My question is if KM has released a firmware which supports at least SMB2 and where can I obtain said firmware? Looking at the current firmware version the machine shows:

    MFP Controller A0ED0Y0-0100-G00-D2(00), is there a newer one?

    Thanks in advance.

  2. #2
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,144
    Rep Power
    346

    Re: bizhub c280 SMB2 support in firmware

    Old machines, I think there is only one Special FW version which is indicated as:
    "has possibility to work on SMBv2 and CIFS.But if it’s does not work or has some problem on SMBv2 and CIFS, we cannot provide solution for you anymore."
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

  3. #3
    Service Manager 1,000+ Posts
    bizhub c280 SMB2 support in firmware


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    1,901
    Rep Power
    70

    Re: bizhub c280 SMB2 support in firmware

    for the very few clients on C360 range we just switched them to FTP instead

  4. #4
    Trusted Tech 50+ Posts
    Join Date
    Jan 2015
    Posts
    82
    Rep Power
    0

    Re: bizhub c280 SMB2 support in firmware

    just enable back SMB v1

  5. #5
    Service Manager 10,000+ Posts
    bizhub c280 SMB2 support in firmware

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,787
    Rep Power
    661

    Re: bizhub c280 SMB2 support in firmware

    bad advise...

    SB1 has problems blocking virus and malware
    do that and you boss might be involved in a lawsuit

  6. #6
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,144
    Rep Power
    346

    Re: bizhub c280 SMB2 support in firmware

    Quote Originally Posted by JDR View Post
    just enable back SMB v1
    Did you really read what OP said?
    Guy managed to do Scan to SMB but he is aware of SMBv1 vulnerabilities as Phil mentioned.
    I try to switch Scan to Box instead of SMB even on newer models, less problems.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

  7. #7
    Service Manager 5,000+ Posts
    bizhub c280 SMB2 support in firmware

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,554
    Rep Power
    182

    Re: bizhub c280 SMB2 support in firmware

    How about scan to email as a workaround?
    I have a few of these using gmail (fw update needed first)
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  8. #8
    Certified Konica Expert 2,500+ Posts
    bizhub c280 SMB2 support in firmware

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,984
    Rep Power
    217

    Re: bizhub c280 SMB2 support in firmware

    no dice for the C280...
    time for a machine from this century

    Attached Images Attached Images
    We know a thing or two because we've seen a thing or two.
    Also don't ask me for files without a contributor badge.

  9. #9
    Former KM Senior Tech 500+ Posts srvctec's Avatar
    Join Date
    Oct 2009
    Location
    Central Kansas
    Posts
    827
    Rep Power
    63

    Re: bizhub c280 SMB2 support in firmware

    Quote Originally Posted by tsbservice View Post
    I try to switch Scan to Box instead of SMB even on newer models, less problems.
    Just curious if you then use Box Operator to access the scans from a PC vs. the convoluted, multiple clicks and screens to navigate to the Box page in PSWC. We install Box Operator in instances where we can't get scan to SMB working or if there is a security concern. Of course, the only drawback on using Box Operator is that it would require admin access on the PC to install it.
    Started in the copier service business in the fall of 1988 and worked at the same company for 33.5 years, becoming the senior tech in 2004 but left to pursue another career on 4/29/22.

  10. #10
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,144
    Rep Power
    346

    Re: bizhub c280 SMB2 support in firmware

    I just map shared folder. Have complete setup, but not in English.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here