Results 1 to 7 of 7
  1. #1
    Junior Member
    Join Date
    Aug 2019
    Location
    Belize City
    Posts
    3
    Rep Power
    0

    Exclamation Pro C5100S Replacement Message Won't Clear

    Good day all, our machine asked us to replace the cleaning unit for the PCU for the color yellow. We did so and the message still appears, we cleared all PM counters and the problem still persists. Any help is appreciated.

  2. #2
    Retired 10,000+ Posts
    Pro C5100S Replacement Message Won't Clear

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,126
    Rep Power
    989

    Re: Pro C5100S Replacement Message Won't Clear

    Two possible problems:
    1. Some models require that a particular door be open when you reset PM counters. You then have to cycle power before closing the door.
    2. The lube bar is installed incorrectly causing the end sensors to be activated. There is a bulletin on this.

  3. #3
    Junior Member
    Join Date
    Aug 2019
    Location
    Belize City
    Posts
    3
    Rep Power
    0

    Re: Pro C5100S Replacement Message Won't Clear

    Quote Originally Posted by slimslob View Post
    Two possible problems:
    1. Some models require that a particular door be open when you reset PM counters. You then have to cycle power before closing the door.
    2. The lube bar is installed incorrectly causing the end sensors to be activated. There is a bulletin on this.
    Thank you for your response. We had already cleared the counters without knowing the doors had to be open, when we tried to reset it again the option to do so was greyed out. Do you have any pictures of what the lube bar sensors look like?

  4. #4
    Service Manager 1,000+ Posts
    Join Date
    Oct 2011
    Location
    Hunter Valley, NSW
    Posts
    1,020
    Rep Power
    57

    Re: Pro C5100S Replacement Message Won't Clear

    Look in service manual/bulletin, once fixed see if other units are due for change. did you fit new unit or rebuild, was lube bar replaced?

  5. #5
    Junior Member
    Join Date
    Aug 2019
    Location
    Belize City
    Posts
    3
    Rep Power
    0

    Re: Pro C5100S Replacement Message Won't Clear

    Quote Originally Posted by davel View Post
    Look in service manual/bulletin, once fixed see if other units are due for change. did you fit new unit or rebuild, was lube bar replaced?
    I believe the lube bar was replaced.

  6. #6
    Service Manager 1,000+ Posts
    Pro C5100S Replacement Message Won't Clear


    Join Date
    Nov 2007
    Location
    New Jersey
    Posts
    1,661
    Rep Power
    86

    Re: Pro C5100S Replacement Message Won't Clear

    read this over, I hope it helps.Near end alert.pdf

  7. #7
    Ricoh Fanboy 1,000+ Posts Oze's Avatar
    Join Date
    Jul 2008
    Location
    Toowoomba,QLD
    Posts
    1,662
    Rep Power
    63

    Re: Pro C5100S Replacement Message Won't Clear

    Also...use SP3-701 (Manual new unit set) and scroll through to the cleaning units to reset them WITH BOTH SIDE DOORS OPEN.
    Those counters will be accessible rather than going in via the PM menu.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here