[mitsubee]

Hello all fellows techs and engineers,

I recently found out a problem that is only with MS Excel Printing with iR3300.

Example:-
I created an excel document with 5 spreadsheet on it.

Spreadsheet 1 = 3 pages
Spreadsheet 2 = 1 page
Spreadsheet 3 = 4 pages
Spreadsheet 4 = 2 pages
Spreadsheet 5 = 3 pages

Now i wanna print to a iR3300 but only using Drawer 2.
Machine Drawer setup is

1st Tray = A4 ( Plain NEW )
2nd Tray = A4 ( Draft Papers )

Here is the problem.... once it start to print...
It will take 3 pieces from 2nd Tray ( Draft paper ) then 1 piece from 1st Tray ( Plain NEW ) then 4 piece from 2nd Tray again and so on...

So what i meant is ... why each time printing jobs jump from 1st spreadsheet to other spreadsheet it will jump tray too even i choose only wanted to print using the drawer 2....OK if i only choose 1 spreadsheet to print to specified drawer then i work great.Only when you choose to print out from all spreadsheet then tray jumping is going to occur.

Does anyone came across this issue before..... any solution or setting in excel ?

thanks for reading