| C203 Hourglass after main board replacement
Hi,
I have just replace a main board on a C203. When I switch it on, it goes to the hour glass screen and then hangs there. I am trying to load firmware and the boot program onto it, but when I put the CF card in, it also just stays on the hourglass and does not give the options to install the firmware. I am using Firmware Imaging Toolkit 2.5.5 to format and write the firmware to the card. I have tested the NVRAM, board and NVRAM in another machine, and it does the same. An ideas what to check for next. I have read about formatting the CF cards with cygwin to be able to use it on the MOSSEL/THAMES machines, does anyone have a how to on doing this? |