| sorry to butt in, cygwin is no longer used on this generation of box.
firstly download IV (initial version)(21) firmware,unzip, create a new directory on say 'c' drive called bizhub, copy/paste the card_work (do not open) folder to the bizhub directory.open dos (run cmd) then type cd\ (enter)cd(space)bizhub\card_work(enter)mkcf(space) t25(space) i (enter)a message will appear asking you to create a file, ignore this.
*i have put (i) as the compact flash card drive, make sure you use the correct drive letter*
the compact flashcard must not exceed 256mb memory, format in either fat or fat 32, as the dos command will format when writing.
after about 5mins the card will be written.
turn the machine off a the main switch, leaving the sub switch on. insert the cf card then power on. the download screen should appear, press start.
when complete, main power off , remove card, main power on.
on start up you should get code c-cc00. go service mode,stop 0 0 stop 0 1, state confirmation, memory hdd adj, conversion up press start, power off/on.
repeat the whole process but with FE1(62) firmware, after which you can go to FE3(88)*this will be ti25)*also c-E002 should display, repeat version up.
R5 fw has the fix for low temp codes.
si |