View Full Version : Jamming Konica fs-603 jamming
acsolutions
06-16-2015, 08:58 PM
Hole punch home position, off! Path is being constructed buy center pin! Is there a way to adjust the position or eliminate the whole punch entirely! Thanks
copierwhisper
06-19-2015, 12:05 AM
I've had the center pin stuck down before, I removed the punch unit to clean and lube. Found a mylar bent and causing the issue, trimmed the mylar and reinstalled the punch unit and it worked great.
Cookr
06-19-2015, 02:52 PM
You can turn hole punch off in the service mode under finisher also.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.