otomatic
11-02-2015, 10:52 PM
Hello All
we have one of our 920's punch unit constantly jamming which is being caused by the motor that drives the punches occasionally overrunning it's home position
for example when running three hole punches then when it jams the sheet will be stuck in the two hole punches
I've cleaned and oiled everything and it all looks fine
any one have any suggestions of what to do next
we have one of our 920's punch unit constantly jamming which is being caused by the motor that drives the punches occasionally overrunning it's home position
for example when running three hole punches then when it jams the sheet will be stuck in the two hole punches
I've cleaned and oiled everything and it all looks fine
any one have any suggestions of what to do next