View Full Version : konica 361 density problem
i dont have a service manual for this machine. the konica 361 black and white prints great but copies light. trying to find density or grid adjustment but dont see it. can someone tell me how to get into the tech rep, mode. thanks!!!
copier addict
11-04-2015, 01:34 PM
If it prints fine but copies light, the problem is most likely in the optics or DF setup. Have you cleaned the mirrors and lens under the glass? Start there.
If it prints fine but copies light, the problem is most likely in the optics or DF setup. Have you cleaned the mirrors and lens under the glass? Start there.
i did clean optics with no improvement.
i did clean optics with no improvement.
found a youtube video on how to get into the tech rep mode and was able to fix it.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.