PDA

View Full Version : Miscellaneous FS-534 with SD-511 at bizhub C652, message "Replace Saddle Staple Cartridge 1 + 2"


Custom Search


Laserbeam
12-19-2015, 06:45 PM
Hello at all,

a bizhub C652 with FS-534 and SD-511 shows in the display the message " Replace Saddle Staple Cartridge 1 + 2".
Both cartridges are not empty!!! Also a mutual exchange is unsuccessful.
But what amazes me, is the fact, that both staple cartridges are to be exchanged.

allan
12-19-2015, 07:34 PM
Amazing shit does happen to these machines. It's otherwise a simple problem with sensors or wiring or a smoked board.

Fiddle with the cartridges firsts. Then go wild.

Merry Christmas.

Mr Spock
12-20-2015, 01:38 AM
if the staples were put in the cartridge backwards this will happen. Also there is a sensor actuator that can pop out if the cartridge is treated roughly.

emujo
12-21-2015, 09:22 PM
My money is on Mr Spock...the C652 is pretty old, and those little flag sensors are plastic and get pretty brittle. Shine a flashlight down the mouth of the staple cartridge and double check for these. Emujo

Custom Search