PDA

View Full Version : KONICA PRO 6500


Custom Search


xzab
01-14-2016, 03:07 PM
my machine has a functional problem number code 2411 and 2401.i have changed yellow developer and when i try to fix it shows number code 2401.when i restart the machine it shows 2411 number code.please help

LinxTech
01-20-2016, 07:49 AM
2411 number code.please help

Did you change developer unit or just the developer?

C-2411 is referring the TCR sensor.

The output of the TCR
sensor /Y (TCRS/Y)
cannot be controlled.
• Printer control board
(PRCB)
• TCR sensor /Y (TCRS/
Y)


Might be broken TCR sensor.

You can try to isolate the problem by swapping the developing unit with another color.

Swamp yellow with cyan developing unit and remember to tape the holes where toner goes into developing unit...

If the error message changes, you know the problem is in the developing unit...

ALSO :

PROBABLE CAUSES:
1. OPEN ICP15, 12V DCfuse (fuse type =ICP-S1.0) on the Printer Control Board (Printer Control Unit).
Check the fuse on the PRCB and replace the board as necessary (p/n A03U R7B5 00).
2. Failed TCR Sensor.
Replace the Toner Density Sensor (p/n A03U M508 01) for the Developing Unit indicated by the failure code.

Hope this helps

Custom Search