View Full Version : Biz hub 654e
antone
03-09-2016, 10:24 PM
Copier does't see finisher! FS 534 ...
Tryed control board...any idea's
Sent from my VS980 4G using Tapatalk
Synthohol
03-09-2016, 10:55 PM
are all 3 wires properly connected? 2 in the back and the one from the bridge unit?
blackcat4866
03-10-2016, 02:34 AM
are all 3 wires properly connected? 2 in the back and the one from the bridge unit?
We had a relatively large customer that figured out how to disconnect the finisher to move it, but somehow could never re-connect it the same way. And they never shut the machine off, so there always was a finisher communication code to deal with. I just don't understand. =^..^=
BR549
03-10-2016, 03:19 AM
Relay unit control board (same as bridge unit)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.