Looking for PARTS & SERVICE Manuals for a Minolta Di620...

[Copycat2]

Hello Copytechnet Community,

I am looking for the PARTS & SERVICE Manuals (preferably in PDF format) for a Minolta Di620 printer/copier.

I am trying to figure out why there are sometimes two part numbers for one replacement part - i.e. Konica Minolta Di620 Fuser Supply Roller (aka Cleaning Web Assembly) has two manufacturer part numbers: 1145-5801-01 & 4002-5732-01. Also, the Konica Minolta Di620 Lower FUSER Pressure Roller also has two manufacturer part numbers: 1129-2021-01 & 1051-1713-01.

Any info. on this or the manuals in PDF format would be greatly appreciated.

Cheers!

Copycat2

[mtech]

The reason they have more than one part number is because they are used in more than one machine. The correct numbers are as follows:
1145-5801-01 Fuser web
1129-2021-01 Lower heat roller
Also FYI, if you are replacing the web, check out the orange foam roller. I am sure you will find it has a flat spot or two. REPLACE IT!
1075-5751-01 Orange foam roller for the web

good luck

[Copycat2]

Hello mtech,

Thanks so much for the lightning FAST reply. I really appreciate it. Your answer was awesome: helpful, concise and right to the point. It's help like this that makes this form so great!

[ni311]

Do you still need it? ;)

[Copycat2]

Yes, I still have a need for both the PARTS & SERVICE manuals for a Minolta Di620. These would come in handy as I try to get this older copier/printer back into service. It has been sitting for almost three years and some of the rubber and plastic parts are "breaking up". Would the manuals be available in a PDF format? Thanks for your help ni311.

[ni311]

yes, in pdf format.

[Copycat2]

Hello ni311,

How can I get the PDF's of the PARTS & SERVICE manuals for a Minolta Di620 copier/printer?

[ni311]

PM your email address

[pantex]

PM your email address
i need to

my email
budi.1812.xp@gmail.com