PDA

View Full Version : Mono Bizhub Pro Print Speed


Custom Search


robdun
06-21-2016, 09:00 PM
Hi Everyone


We have bizhub C550 and C452 office machines which we exclusively use for printing mono A4 labels at around 150 gsm, the print speeds we get are between 25 to 30 pages per minute using thick 1+ setting.

We are thinking of investing in a bizhub Pro 951 or 1100 mono production press. I can see what the headline ppm speed is for the presses but I'm trying to find out what the print speed would be for thicker stock i.e.150 gsm paper. Can anyone point me to where there s a summary of print speeds for different thickneses of stationery.

Regards

Robdun

allan
06-22-2016, 12:11 AM
You will need the additional paper feed unit and would only be able to use tray 4 otherwise the labels tend to separate on these machines.
I do print labels on the BH B1250 and need to set the paper stock correctly other wise labels get stuck in the registration section.
Not exactly sure about the speed but its does slow down quite a bit.

But it does fuse ok at full speed.

Custom Search