PDA

View Full Version : Konica Bizhub C654 series


Custom Search


pick
01-25-2017, 04:19 PM
We are starting to put out the Bizhub C654 in the field for rentals and sales. I was just wondering what kind of issues that have been found on these copiers. I saw a thread a while back on the Cyan developer does anyone know if this was ever resolved. So my main question is what are the field problems ya are seeing and how do you rate these machines thanks for your time.

Woxner
01-25-2017, 06:38 PM
they are good machines. i am not aware of magenta issues on these. the 2 series did have some problems of dumping

pick
01-25-2017, 06:45 PM
Thanks so far we like them no issues yet I appreciate the feedback.

copier tech
01-25-2017, 08:51 PM
Yes these are a great box, keep the firmware up to date & keep them nice & clean you wont have any issues.

copyman
01-25-2017, 09:46 PM
Great machines. I had one run to 800k in about 1 year before needing anything but toner, ADF & PF rollers. 400k before 1st call ! 3 calls in 2.5 yrs !!

copier tech
01-26-2017, 06:14 AM
Great machines. I had one run to 800k in about 1 year before needing anything but toner, ADF & PF rollers. 400k before 1st call ! 3 calls in 2.5 yrs !!

That is impressive, beats an Canon hands down!

copyman
01-26-2017, 01:42 PM
Just to clarify my prior post. What I meant was during that first 800k only thing needed was toner, adf & PF rollers. Didn't want to give the impression that toners lasted 800k :)

pick
01-26-2017, 02:07 PM
hate to see the price of toner if it lasted that long thanks for the feed back.

CompyTech
01-26-2017, 02:18 PM
They are great machines. We too had some run to 1mil in a year before replacing anything, except maybe rollers. I would say the most important thing to keep clean is that paper dust filter and the sensor under it.

Custom Search