View Full Version : konica 7050
Mark B
08-05-2008, 06:00 PM
does anyone have spec. sheet, product info guide, or something that tells me what finisher goes on this model. We have a couple of these new in box (don't laugh) and I am woundering why this fs 103B will not work but the fs 103 will
does anyone have spec. sheet, product info guide, or something that tells me what finisher goes on this model. We have a couple of these new in box (don't laugh) and I am woundering why this fs 103B will not work but the fs 103 will
7050 take FS-102,FS-103,FS-103A. FS-103B for 7150,7060 model. KMBS has model cross reference lists on MYKONICA page.
Mark B
08-05-2008, 06:32 PM
One other problem is the machine picks the original size good through the adf but off the glass I have an 8 1/2 orig and the machine thinks it is an 8 1/2R and I do not remember what causes that
One other problem is the machine picks the original size good through the adf but off the glass I have an 8 1/2 orig and the machine thinks it is an 8 1/2R and I do not remember what causes that
Check photo sensors under glass?
Mark B
08-05-2008, 07:20 PM
I just fixed it. It was the size dect sensor. The bracket was a little bent. We stoped selling Konica machines about 8 years ago now we sell Kyocera. I did go to school for the 7050/7060 and even got a silver seal, but that was a long time ago. I do not have access to mykonicaminolta any more.
Mark B
08-13-2008, 04:25 PM
Would someone please send to me a 7050 service manual, (my old paper manuals have fallen apart). mbeitler@rtrbusinessproducts.com
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.