View Full Version : CQ KM bizhub C360 black fading in and out
Ingersoll
12-21-2017, 08:06 PM
I have a KM bizhub C360 with the black fading in and out. Will print 100s of pages fine then just fades out to blank pages, and then black will return like normal.
I have replaced the black developer, black drum, Transfer belt and transfer roller. It does not give any errors. I am thinking maybe a PCB?
Woxner
12-22-2017, 12:56 AM
replace the dev clutch it stops and gives light or blank coipes
D_L_P
12-22-2017, 01:07 AM
Try the HV pcb if the clutch doesn't work.
blackcat4866
12-22-2017, 01:09 AM
Check the white bushings on the sub-hopper. They can pack up with toner, stalling the toner motor intermittently. Let's see if I have a photo:
3846538466
=^..^=
Tech Helpdesk
12-22-2017, 09:21 AM
Dev Clutch is on its way out
Ingersoll
12-22-2017, 05:58 PM
replace the dev clutch it stops and gives light or blank coipes
Do you happen to have a p/n for the clutch? I am not seeing it in the parts guide, Just clutches for the paper drive.
Thanks
Woxner
12-22-2017, 09:19 PM
A0EDM20000 it shows in the main drive section. someone can double ck me
Hansoon
12-23-2017, 02:23 PM
Never had to replace any kind of clutch in KonicaMinolta's. I blow them out with compressed air first, soak them with brake cleaner and blow the clutch dry again with air.
However, when I was working for a company and not paying the part myself, I would get a new part too - but I'm an Indy. Nuff said? :cool:
Hans
Ingersoll
01-03-2018, 12:44 AM
replace the dev clutch it stops and gives light or blank coipes
P/N for the clutch Blk Dev Clutch CL6? The Parts Manual does not list it, only as a part of the the A0ED-R704-00 Main Drive Assy.
Thanks
Woxner
01-03-2018, 01:15 AM
i have replaced just the clutch it has a part #
Woxner
01-03-2018, 01:24 AM
http://cscsupportftp.mykonicaminolta.com/media/CPDocs/bizhubC360series_CL6.pngProblemWhen producing only Black & White copies, they are sometimes blank or the black print looks gray.
Solution
CAUSE: Developing clutch/K (CL6) wire intermittently OPEN.
SOLUTION: Replace CL6 (p/n A0ED M200 00)
Desert Rat
01-03-2018, 02:46 AM
I have three of these machines and they seem to run fairly good.
I just wanted to say thanks for the great post. As an indy I look at
just about any machine and don't get a great deal of experience on
one product line.
Thanks again
DR
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.