PDA

View Full Version : Konica Minolta code C-E006


Custom Search


Bamba Diop
03-30-2018, 10:10 PM
Hi All,
I have a KM C8000 wich gives me headache.
I have C-E006 code. Did Firmware update bur no result. the code appears after printing or copying around 6 pages.
I have read in the sm it could be OACB board faulty.
Any Hekp?

Thanks

Synthohol
03-30-2018, 11:29 PM
PROBABLE CAUSES:
1. Firmware bug or possible failed Memory Control Board/1. (bizhub PRESS C8000 only)
Confirm that firmware is version 20 or later. The Memory Control Board/1 (p/n A1RF H020 02) may need to be replaced.

bit switch 2-0 Set this switch to 1 after installing the optional hard disk to recognize the connection of the hard disk to the copier. (if installed)


hope these solutions from KM help.

Custom Search