View Full Version : 5 "SharkFins" Dsiplayed
copierwhisper
04-10-2018, 10:24 PM
Konica Minolta C224e: The control panel displays 5 "SharkFins" and freezes. Is there any documentation out there that tells us what it means based on how many "fins" are displayed on the screen?
mincopier
04-10-2018, 10:36 PM
Personally it has been my experience that when stuck at the fins/pilars it is the NVRAM. These are only available from Konicaminolta. Do not swap from another machine.
Synthohol
04-10-2018, 10:43 PM
agreed, likely the SSD board.
here is a doc explaining the pillars (shark fins)
Woxner
04-11-2018, 12:13 AM
try reloading firmware. it has worked for me sometimes. it may just have lost its marbles
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.