PDA

View Full Version : C451 print issue


Custom Search


Amincopy
06-25-2018, 10:30 AM
hi, the machine is printing some pattern in every print or copy. :mad: after a lot printing it will disappear but after machine turning on the issue appear again. can anyone help? thank you:o
39957

habik
06-25-2018, 11:29 AM
Transfer belt is ready to bin.

Sent from portable device using fast cheapset!

Amincopy
06-25-2018, 02:51 PM
Transfer belt is ready to bin.

Sent from portable device using fast cheapset!

Why it prints same pattern each time?

copier addict
06-25-2018, 04:59 PM
Why it prints same pattern each time?

Because the transfer belt is worn out and is ready to be replaced.

habik
06-25-2018, 05:47 PM
Why it prints same pattern each time?When cleaning fails, does that. Check manual TO and you'll understand.

Sent from portable device using fast cheapset!

907tec
06-25-2018, 07:46 PM
I would be suspect of the ITB Cleaning motor/gears. Definitely try a different transfer belt first, but I usually see this particular issue when the cleaning assembly itself fails.

darry1322
06-25-2018, 08:10 PM
Why it prints same pattern each time?


Between print jobs the machine prints color patches on the belt for calibration.

Custom Search