PDA

View Full Version : bizhub c368 no network tab in admin screen


Custom Search


n25an
07-25-2018, 08:33 AM
bizhub c368

arrived onsite...
looked at network port on copier
amber and green light flashing on network port almost to solid

unable to enter admin mode...
locked by onsite network support
acquired password

entered...
no network tab

went to service mode
initialized network settings
in system 1 initialization

rebooted copier

waited 10 minutes...
went into admin mode
network tab available

tested copier
copies, prints, faxes, scans, etc.
all work...

next I had to re-enter
network settings

I retested copier... all worked...

connected it to customer network...
unable to print and scan

customer had managed switch that controls network drop
customer reinitialized...
print jobs started printing...
no scanning...
onsite network support re-entered scan to email settings
issue resolved...

I ran ethernet through surge protector
and issue resolved...

if that didn't work I would have to

worst case scenario (http://www.copytechnet.com/forums/konica-minolta/112976-konica-minolta-bizhub-c252-no-network-menu-post536600.html#post536600)

Custom Search