I want to help

[tech jalal]

error 4802 bizhub c284

I am a technician and I have a book

[Phil B.]

Re: I want to help... error 4802 bizhub c284


yup it's messed up! It's more like " Re: I NEED some help "

what have you done?
have you googled the problem?
do you have the service manuals?
are you a tech?

[srvctec]

yup it's messed up! It's more like " Re: I NEED some help "

what have you done?
have you googled the problem?
do you have the service manuals?
are you a tech?

My general analysis on tech or not is if in their post, they don't mention a thing that was done, as well as that being their first post= not a tech. :)

[Phil B.]

My general analysis on tech or not is if in their post, they don't mention a thing that was done, as well as that being their first post= not a tech. :)

to a certain extent I agree... I (wrongly) made that assumption about a month ago... seems that person had been in the industry the same amount of years as I and got rather 'huffy' with me about it.

So now I try to be a more 'humble and quieter Pooh Bear" ;)

[allan]

:eek: He left a clue. He is tech jalal.
So what have you done so far?

Looks like the old board switcheroo went haywire.
Googled the solution in 5 seconds flat!

Error Codes > Konica-Minolta > bizhub 364e > Code C4802 (https://printcopy.info/?l=en&mod=erc&brand=Konica-Minolta&model=bizhub%20364e&code=C4802)

[Phil B.]

error 4802 bizhub c284

I am a technician and I have a book

don't edit the original post.. you DIDN'T mention ANY of that in OP.

[allan]

Oops just edited my previous post above.
Don't want to upset the whip:p.

[Phil B.]

:eek: He left a clue. He is tech jalal.
So what have you done so far?
Looks like the old board switcheroo went haywire.
Googled the solution in 5 seconds flat!
Error Codes > Konica-Minolta > bizhub 364e > Code C4802 (https://printcopy.info/?l=en&mod=erc&brand=Konica-Minolta&model=bizhub%20364e&code=C4802)

I googled it also.. found same results....
he never mentioned what has been done...
if you notice he edited OP from " I want to help error XXX model XXX"
as been said.. I don't think he IS a TECH or has the manual...

therefore done here.

[tsbservice]

Q:Messed up with board replacement(PRCB) without data backup before?
A:Most probably-Yes
Q:Cannot enter service mode?
A:Most probably-Yes

Solution:
Hire a tech.

[Phil B.]

Q:Messed up with board replacement(PRCB) without data backup before?
A:Most probably-Yes
Q:Cannot enter service mode?
A:Most probably-Yes

Solution:
Hire a tech.

Ohhhh... but he IS a tech WITH manual (bwahaha)

He still hasn't answered WHAT has been done...

but he was kind enuff to edit the OP from mode/code to
"Am a tech with manual" but left out the error code!
O

[tech jalal]

[QUOTE = Phil B.؛ 739430] Ohhhh ... لكنه تقنية مع دليل (bwahaha)

لم يرد بعد على ما تم القيام به ...

لكنه كان محققًا جيدًا لتحرير OP من الوضع / الرمز إلى
"أنا تقنية مع دليل" ولكن استبعد رمز الخطأ!
O [/ QUOTE]


توقف الحل 00 توقف وضع الخدمة 01 c 0 وضع تحميل بيانات المحرك نعم موافق قم بإيقاف تشغيل مفتاح الطاقة الرئيسي وقم بتشغيله مرة أخرى أكثر من

[tech jalal]

Ohhhh... but he IS a tech WITH manual (bwahaha)

He still hasn't answered WHAT has been done...

but he was kind enuff to edit the OP from mode/code to
"Am a tech with manual" but left out the error code!
O



stop 00 stop 01 service mode stop 0 c[Engine Data Backup] [Engine Data Load mode] [Yes] “OK” Turn OFF the main power switch and turn it ON again more than 10 seconds after

[Phil B.]

[QUOTE = Phil B.؛ 739430] Ohhhh ... لكنه تقنية مع دليل (bwahaha)

لم يرد بعد على ما تم القيام به ...

لكنه كان محققًا جيدًا لتحرير OP من الوضع / الرمز إلى
"أنا تقنية مع دليل" ولكن استبعد رمز الخطأ!
O [/ QUOTE]


توقف الحل 00 توقف وضع الخدمة 01 c 0 وضع تحميل بيانات المحرك نعم موافق قم بإيقاف تشغيل مفتاح الطاقة الرئيسي وقم بتشغيله مرة أخرى أكثر من

WTF? is this?

[copier addict]

WTF? is this?

It looks like a language other than english. They do exist you know. Lol :cool:

[Phil B.]

It looks like a language other than english. They do exist you know. Lol :cool:

well aware of other languages... but it doesn't look like french or german..

I thought we had an understanding to post in english @ CTN..
I mean it is located in the USA.. "when in Rome....."

[guitar9199]

well aware of other languages... but it doesn't look like french or german..

I thought we had an understanding to post in english @ CTN..
I mean it is located in the USA.. "when in Rome....."


Google Translate is MY friend!!

LOL!

[Phil B.]

Google Translate is MY friend!!

LOL!Why? It's no my job to translate the post from those that are asking for help. ESP when posted in ENGLISH the first time!

Sent from my SM-G960U using Tapatalk

[tsbservice]

Q:What this topic brings to others?
A: I guess ATM nothing.
Q:Why?
A:Because nobody knows what we're discussing.
Q:Smart comments welcomed?
A:Yes, of course ;)

[allan]

So does this mean its fixed??
Agreed that English should be the only language in use here.
Its not my first language.

[Phil B.]

So does this mean its fixed??
Agreed that English should be the only language in use here.
Its not my first language.

allan...
and since ESL is your plus.. I must say you do well. Kudos.. I will come back 'morrow and give rep points ( too many today)

as far as fixed? Who Da Fuck knows.. no reply from OP..