PDA

View Full Version : develop ineo+253(bizhub)


Custom Search


connect
11-13-2008, 08:00 PM
i have a 253 that is linked up to a a network,and when i go into the web browser and then go into admin mode i try clicking on the network tab and ll i get at the bottom of the page is PAGE ERROR.i have updated to latest firmwear + drivers.also ive tried this just linking it up to my laptop.which gives me the same problem...:eek:

DadO
11-14-2008, 07:18 AM
Try to use HTML view not the flash view.

connect
11-14-2008, 10:22 AM
yeah tried that thanks,but still the same.

have now got it to see all tabs in web browser by using firefox instead of internet explorer 7...must be sum security issues!!!!

lanierboy
11-14-2008, 03:42 PM
if you press refreash in IE then you will see the tabs, as you say Firefox is ok
blame bill gates!!!!

TheOwl
11-21-2008, 01:22 AM
Depending on the version of .Net Framework work you, alot of Konica Minoltas will have the same issue. You can hit the refresh button on the Konica Minolta web interface (not the IE one as this can boot you out of admin mode sometimes) or you can change the following setting in IE.

Tools
Internet Options
Settings - Marked under Browsing History in the General Tab.
Change the 'Check for new versions of stored pages' to 'Everytime I visit the Webpage'.

This has fixed most of my problems with IE7

connect
11-25-2008, 02:39 PM
thanks a million mate, that worked a treat......happy days!!!!!!!! :)

Custom Search