PDA

View Full Version : laminating


Custom Search


hsjohnny
01-20-2009, 03:38 AM
Ok, so I bypassed the fusing unit entirely.

Tricked the unit out tothink the fuser was actually in the unit when it was not.

I created my own laminating unit and the printer worked just fine!

Of course, I had to use stepper motors and external sensors to do so, but it was not that hard.

Following the timing chart from the user manual I was able to get things close enough, then I fine tune it to FLAWLESS PERFECTION.

Now I can create secondary laminations on my own!!!

Konica can KMA as far as that is....

Someday I am going to be able to re-program the unit itself and REM out all the sensors in the hardware. When that happens, my dream will come true!


They put all the paper feed sensors in place and the Algorythms to handle that, but I do'nt need that!

Anybody follow me?

10871087
01-20-2009, 04:28 AM
Anybody follow me?


Uh, No....

Why not just buy a laminator?

What is a "secondary lamination"?

Custom Search