sharp AR 235

[xeroxsharp]

AR 235 : When power on the copier,sometimes got E7-11 or F5-02 and sometimes it is READY TO COPY. Allredy replaced flat cable (new) and scaning assy from another copier,but stil not good. Any ideas,because I will order first new scaning assy not only scaning lamp. Thanks

[igi]

hi there
the reference white plate is good to replace for this errors you getting.
try this
good luck

[xeroxsharp]

1. Replaced scaning assy,fixed only E7-11,but still got another error code sometimes when I powered copier.
2. Replaced lens-not with new one,adjusted it,and it works fine

PS: This was a damn job!!!!!!!